CD-DV999W
E-10
ENGLISH
Preparation for Use
4
CD-DV999W (
Z
)
TINSZA017AWZZ
H
Aerial connection
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS terminal and position the FM
aerial wire in the direction where the strongest signal can be received.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM LOOP socket. Position the AM loop
aerial for optimum reception. Place the AM loop aerial on a shelf, etc., or attach
it to a stand or a wall with screws (not supplied).
Note:
Placing the aerial on the unit or near the AC power lead may cause noise
pickup. Place the aerial away from the unit for better reception.
Installing the AM loop aerial:
< Assembling >
< Attaching to the wall >
External FM aerial:
Use an external FM aerial if you require better reception. Consult your dealer.
External
FM aerial
75 ohm
coaxial cable
Screws (not supplied)
Wall
H
Speaker connection
Connect the black wire to the minus (-) terminal, and the red wire to the plus (+)
terminal.
Caution:
I
Use speakers with an impedance of 6 ohms or more, as lower impedance
speakers can damage the unit.
I
Do not mistake the right and the left channels. The right speaker is the one
on the right side when you face the unit.
I
Do not let the bare speaker wires touch each other.
I
Do not stand or sit on the speakers. You may be injured.
Incorrect
Note:
When an external FM aerial is used, disconnect the supplied FM aerial wire.
*DV999W_EP09-14
04.3.4, 17:43
10
