Sharp CD-DV650W Page 62 Operation Manual Download

Page: 62 / 74

E-61

ape Recording

CD-DV650W

CD-DV850W

ENGLISH

Recording to a cassette tape (continued)

Dubbing from tape to tape

You can record from TAPE 1 to TAPE 2.

Press the ON/STAND-BY button to turn the power on.

Load a prerecorded cassette into the TAPE 1 cassette
compartment. Insert a blank tape into the TAPE 2 cassette
compartment.

It is recommended that the recording tape is the same length
as the master tape.

Press the TAPE (1

button until “TAPE 1”
appears on the display.

Press the

button.

Recording will be paused.

Press the

button to start dubbing.

To stop dubbing:

Press the

(

) button.

TAPE 1 and TAPE 2 will simultaneously stop.

Erasing recorded tapes

1. Load the tape to be erased into the TAPE 2 cassette compartment

with the side to be erased facing towards you.

2. Press the TAPE (1

2) button until “TAPE 2” appears on the

display.

3. Press the

button.

4. Press the

button to start erasing.

Note:

Make sure that the TAPE 1 is not in use.

CD-DV650W_56-61

3/21/07, 3:11 PM

Summary of Contents for CD-DV650W











































































Search results

Summary of Contents for CD-DV650W

Reviews:

Related manuals for CD-DV650W

Brands by name

Popular brands

Sharp CD-DV650W, Operation Manual

Search results

Summary of Contents for CD-DV650W

Reviews:

Related manuals for CD-DV650W

Brands by name

Popular brands