E-14
Preparation for Use
CD-DV650W
CD-DV850W
ENGLISH
System connections (continued)
H
Setting the FM/AM span selector
The International Telecommunication Union (ITU) has established that
member countries should maintain either a 100 kHz or a 50 kHz
interval between broadcasting frequencies of FM stations and 10 kHz
or 9 kHz for AM station. The illustration shows the 50/9 kHz zones
(regions 1 and 3), and the 100/10 kHz zone (region 2).
Before using the unit, set the SPAN SELECTOR switch (on the rear
panel) to the interval (span) of your area.
To change the tuning zone:
1. Press the ON/STAND-BY button to enter the stand-by mode.
2. Set the SPAN SELECTOR switch (on the rear panel) as follows.
I
For 50 kHz FM interval (9 kHz in AM)
→
50/9
I
For 100 kHz FM interval (10 kHz in AM)
→
100/10
3. Whilst pressing down the
I6
button and the X-BASS/DEMO
button, press the TUNING
X
button until “CLEAR AL” appears.
Caution:
This operation will erase all data stored in memory including clock,
timer settings, tuner preset and CD programme.
To cancel the demonstration mode:
When the unit is in the power stand-by mode (demonstration mode),
press the X-BASS/DEMO button. The demonstration mode will be
cancelled and the display will disappear.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the
X-BASS/DEMO button.
Note:
When the power is on, the X-BASS/DEMO button can be used to
select the extra bass mode.
H
Demonstration mode
The first time the unit is plugged in, the
unit will enter the demonstration mode.
You will see words scroll.
X-BASS
/DEMO
X-BASS
/DEMO
CD-DV650W_10-15
3/21/07, 2:49 PM
14
