E-43
Disc Playback
CD-DV650W
CD-DV850W
ENGLISH
Video CD playback (continued)
To interrupt playback:
Press the
6
/
STILL
60
button on the remote control.
To resume playback from the same point, press the
0
button.
To stop playback:
Press the
H
button.
To exchange to other disc whilst playing:
Press one of the
s
1 -
s
5 buttons of the stopped disc and within 5
seconds,
press the OPEN/CLOSE button and exchange discs.
To remove the discs:
Whilst in the stop mode, press the
s
1 -
s
5
buttons and within 5
seconds, press the OPEN/CLOSE button.
Notes:
I
Playback control allows a video CD to be played back according
to instructions recorded on the disc. The “previous”, “next”, “return”
and “select” operations may function differently, depending on the
P.B.C. CDs.
I
Some video CDs with playback control may have an “auto pause”
recorded on them. When such a disc is played, the screen will
stop automatically at the point where an “auto pause signal” has
been inserted.
I
If the picture looks dirty when a video CD is played back, there
may be a scratch on the video CD. Replace it with another video
CD in good condition.
Caution:
I
Do not place two discs in one disc tray.
I
Do not play discs of special shapes (heart, octagon, etc.). It may
cause malfunctions.
I
Do not push the disc tray whilst it is moving.
I
Do not move the disc tray by hand. This may cause malfunctions.
I
If the power fails whilst the tray is open, wait until the power is
restored.
I
If the disc tray is stopped with force, “ER-CD20” will appear on the
display for 3 seconds and the unit will not function. If this occurs,
press the ON/STAND-BY button to enter the power stand-by mode
and then turn the power on again.
I
If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
I
If a disc is damaged, dirty, or loaded upside down, the disc will
skip or not play back.
H
To play without activating the playback control
function (Video CD with P.B.C. only)
You can play a video CD with P.B.C. without activating the playback
control function.
In this case, the menu screen will not appear, and the disc will be
played in the same way as a video CD without P.B.C.
I
Default setting for VCD is P.B.C. OFF.
After finish VCD TOC reading, when play key is pressed
it will start play the VCD in P.B.C. OFF mode.
I
To turn to P.B.C. ON mode, press TOP MENU button in remote
control whilst in stop or playback mode.
I
“
5 3
PRESET
X
” and “
2 4
PRESET
W
” button is invalid
during STOP whilst VCD disc in P.B.C ON mode.
Notes:
I
The P.B.C. function also can be cancelled whilst in the playback
mode by pressing TOP MENU button in remote control.
I
Some video CDs with P.B.C. cannot be played back when the
P.B.C. mode is off.
CD-DV650W_41-44
3/21/07, 3:07 PM
43
