Sharp AR-FX2 Operation Manual Download Page 91

Page: 91 / 168

3-21

User Pr

ogram and

Inde

USING CONVENIENT

FUNCTIONS 1

Press the "1" key.

●

The original that you scan is added to the original that is already in
memory.

MEMORY POLL MODE

1=1TIME, 2=REPEAT

Press the number "1" or "2" key.

●

If you press the "1" key, the original in memory is used for polling
once and then automatically erased.

●

If you press the "2" key, the original is preserved in memory and can
be used for multiple polling operations.

Example

MEMORY POLL (1TIME)

PRESS START KEY

Press the START key.

●

Scanning begins. When scanning from the original table, if there are
several pages, set the next page and press the START key again as
needed. When the last page has been scanned, press the # key.

READING

Confirm that the fax machine has entered automatic
reception mode.

●

If your fax machine receives a polling request, polling begins. To
confirm that the fax machine is in automatic reception mode, see page
2-15.

Polling

POLLING

Summary of Contents for AR-FX2









































































































































































Search results

Summary of Contents for AR-FX2

Reviews:

Related manuals for AR-FX2

Brands by name

Popular brands

Sharp AR-FX2, Operation Manual

Search results

Summary of Contents for AR-FX2

Reviews:

Related manuals for AR-FX2

Brands by name

Popular brands