AR-M256/M257/M258/M316/M317/M318/5625/5631 SIMULATION 8 - 45
Operation/procedure
1.
Touch the item to be adjusted.
The item and the currently set value are highlighted.
2.
Enter the adjustment value with the 10-key and press the [P] key.,
The display goes to the copy menu.
When the [START] key is pressed, the display goes to the copying
state and print is started.
(When the [P] key is pressed: Copy menu)
3.
Select the paper feed tray and the print density.
Enter the exposure level with the 10-key.
4.
Press the [START] key.
Copying is started.
Note: When this simulation is canceled, the display is shifted to the ini-
tial menu, but the machine is not reset.
Operation/procedure
1.
Touch the item to be adjusted.
The item and the currently set value are highlighted.
2.
Enter the adjustment value with the 10-key.
Operation/procedure
1.
Touch the item to be adjusted.
The item and the currently set value are highlighted.
2.
Press the [START] key.
The display is shifted to the copy menu.
3.
Select the paper feed tray and the print density.
Enter the adjustment value with the 10-key.
4.
Press the [START] key.
Copying is started.
Note: When this simulation is canceled, the display is shifted to the ini-
tial menu, but the machine is not reset.
50-12
Purpose
Adjustment
Function
(Purpose)
Used to adjust the print image center position.
(Adjustment can be made for each document mode.)
Section
Image processing
Item
Picture quality
Image position
Item
Content
Setting range
Default
1
OC
OC document scan
1-99
50
2
SPF(SIDE1)
RSPF document front
surface scan
3
SPF(SIDE2)
RSPF document back
surface scan
51
51-1
Purpose
Adjustment
Function
(Purpose)
Used to adjust the OPC drum separation pawl ON time.
Section
Image process
(Photoconductor/Developing/Transfer/Cleaning)
Item
Operation
Item
Setting range
Default
1
145mm/s
1-99
50
2
122mm/s
51-2
Purpose
Adjustment
Function
(Purpose)
Used to adjust the contact pressure of paper onto the
resist roller in each section (copier paper feed section,
duplex paper feed section, RSPF paper feed section).
(When the print image position varies greatly for the
paper or when a lot of paper jam troubles occur, the
adjustment is required.)
Section
Paper transport (Discharge/Switchback/Transport)
Item
Operation
Item
Content
Setting range
Default
1
BYPASS
Manual feed
1-99
50
2
TRAY1
1st cassette
1-99
50
3
TRAY2
2nd cassette
1-99
50
4
TRAY3
3rd cassette
1-99
50
5
TRAY4
4th cassette
1-99
50
6
DUPLEX
Back print
1-99
70
7
SPF(SIDE1)
RSPF front surface
1-99
50
8
SPF(SIDE2)
RSPF back surface
1-99
50
SIMULATION 51-1
