AR-M256/M257/M258/M316/M317/M318/5625/5631 SIMULATION 8 - 19
Operation/procedure
The trouble error codes are displayed in the sequence of the latest one
first. Max. 40 items of information are stored. (Older ones are deleted
in sequence.) The machine condition can be estimated by this data.
Operation/procedure
Used to display the ROM version of each section.
[Display example]
ROM version 1.250
→
[1.25] (up to 2 decimal places)
The display of the protocol monitor and the soft SW follows this display.
If it is not installed, “- - - - - - - - - -” is displayed.
Operation/Procedure
(Initial screen)
The currently set value is highlighted beside the adjustment item.
1.
Select the adjustment item with the 10-key.
2.
Press the [START] key.
The display is shifted to the copy menu and the set value is stored.
3.
Select the paper feed tray and the print density.
4.
Press the [START] key.
Copying is started. (Printing at 1200dpi cannot be made.)
After canceling a jam (After picking up, the [C] key is invalid.)
When the other information is repeatedly printed, the display may show
the message, “Remove original from original table.” However, the oper-
ation is performed normally.
* When the IMC board is not installed, key input is disabled.
* Duplex print cannot be made.
* For the FAX SIM setting list, the display and the operating proce-
dures differ.
22-4
Purpose
Adjustment/setting/operation data output/check
(display/print)
Function
(Purpose)
Used to check the total trouble (self diag) history.
Item
Trouble
22-5
Purpose
Adjustment/Setting/Check
Function
(Purpose)
Used to check the ROM version of each unit (section).
Item
Software
S/N
Machine serial number
MCU
Main Control Unit
IMC
IMC
OPE
Panel + Panel label code
PRINTER
PRINTER
NIC
NIC
FINISHER
FINISHER
FAX
FAX
PUNCH
UNIT
Punch unit
Panel
display
Destination
Selection code
Panel software support
language
JPN
Japan
Japanese, American
English, English
EFS
SEC
AJ/AM
American English, English,
French, Spanish,
Brazilian Portuguese
SECL
AL/AC
SUK
BK/BB
SCA/SCNZ
BA/BN
Distributor
area
EEU
SEEG/
SEA/East
Europe,
etc.
GG/GD
English, German, Polish,
Czech, Hungarian, Greek,
Turkish, Russian, French,
Italian, Slovak
NEU
SEF/
SEES/
SEIS/SEN,
etc.
BG/DG/
BD/DD
English, German, French,
Spanish, Dutch, Italian,
Portuguese, Swedish,
Norwegian, Finnish,
Danish
CHN
SOCC
BZ
UE5
Simplified Chinese,
American English, English
TWN
Taiwan
BE/BT
UT1
Traditional Chinese (Local
support), American
English, English
ARB
Saudi
Arabia
BT
UQ2/
SF1/
UW2
American English, English,
French, Spanish, Hebrew
(Local support), Arabic
22-6
Purpose
Adjustment/setting/operation data output/check
(display/print)
Function
(Purpose)
Used to print each key operator setting, the account
information, and the machine adjustment values.
Item
Data
Setting/adjustment data
Item
Content
1
ALL
All lists group print (Default)
2
KEY OPE
Key operator information list
3
ACCOUNTING
COUNTERS
List of total number of prints
4
AUDITOR NO.
Department number list
5
MACHINE SIM
SETTING
Machine simulation setting list
6
FAX SIM SETTING*1
FAX simulation setting list (Only when
the FAX board is installed. The display
does not go to the print data transfer
display, but to the FAX SIM menu.)
Panel
display
Destination
Selection code
Panel software support
language
SIMULATION 22-5
Panel label code
