Basic adjustment
Child Lock
Setup
Allows you to use a password to protect certain
settings from being accidentally changed.
Change password
Register a four-digit password number to use the
“Child Lock” function.
Enter the four-digit number as a password using
0
–
9
.
Enter the same four-digit number as in step 1 to confirm.
“The system password has been changed successfully” displays.
NOTE
To view a locked channel, you must enter the password (See page
25 for locking channels from viewing in TV mode). When you select
a locked channel, a password prompt message pops up. Press
RTN
(RETURN) to display the password input window.
Clear password
Allows you to reset your password.
NOTE
As a precautionary measure, make a note of your password
on the back of this operation manual, cut it out and keep it in
a safe place that children cannot reach.
1
2
•
•
•
Language
Setup
You can select a OSD language from the “Setup”
menu. Select from among 4 languages (English,
Simplified Chinese, Traditional Chinese and Arabic).
Teletext*
What is Teletext?
Teletext broadcasts pages of information and
entertainment to specially equipped television sets.
Your TV receives Teletext signals broadcast by a TV
network, and decodes them into graphical format for
viewing. News, weather reports, sports information,
stock exchange prices and programme previews are
among the many services available.
NOTE
This teletext function is not applicable for Hong
Kong market.
Teletext mode
Teletext is turned on/off with
m
on the remote control
unit. You can operate your TV in Teletext mode directly
by inputting commands with the remote control unit.
Turning on and off Teletext
Select a TV channel or external input source
providing the Teletext programme.
Press
m
to display the Teletext.
Press
m
again to display the Teletext on the
right screen and normal image on the left screen.
*
1
2
3
Password settings
Language Settings (language)
TELETEXT
TELETEXT
When viewing the Teletext information
Press
CH
r
to increase the page number.
Press
CH
s
to decrease the page number.
Button functions
Colour (Red/Green/Yellow/Blue):
You can select a group or block of pages displayed
in the coloured brackets at the bottom of the screen
by pressing the corresponding
Colour (Red/Green/
Yellow/Blue)
on the remote control unit.
•
•
TELETEXT
Red
Green
Yellow
Blue
0–9:
Directly select any page from 100 to 899 by using
0–9
.
v
(Top/Bottom/Full):
Each time you press
v
, the TELETEXT image
switches as shown below.
Top (Displays in the upper half of the screen)
Bottom (Displays in the lower half of the screen)
Full (Displays in full screen)
k
(Reveal hidden for TELETEXT):
To reveal hidden information such as an answer to a
quiz, press
k
.
Press
k
again to hide the information.
3
(Hold):
To stop updating Teletext pages automatically, press
3
.
Press
3
again to release the hold mode.
•
•
Each time you press
m
, the screen switches as
shown to the upper right.
If you select a programme with no Teletext signal, “No
Teletext available” is displayed.
The same message displays during other modes if no
Teletext signal is available.
•
•
•
26
LC-65XS1M_en.indd 26
LC-65XS1M_en.indd 26
2009/01/15 16:03:30
2009/01/15 16:03:30
