1
2
3
Quick guide
Setting the TV and antenna cables
Connect the HDMI cable
to the DISPLAY OUTPUT
terminal on the AVC System.
1
Attach the parts of the fixture
to the HDMI cable, pushing
the tab upward.
2
Insert the tab for the fixture
into the fixture anchor hole on
the AVC System.
3
Handling the AVC System
CAUTION
Do not put a VCR or other device on top of the AVC System.
Keep enough space above and to the sides of the AVC
System.
Do not block the ventilation openings on the top and left side or
the exhaust fan on the right side.
Do not spread a thick cloth beneath the AVC System or cover it with one, as this can cause overheating and result in
malfunction.
•
•
•
•
5cm
5cm
5cm
NOTE
The POWER indicator of the AVC System lights up when the main power is turned on after connecting the Display and AVC System using the
supplied HDMI cable.
The HDMI cable should be firmly connected. Failure to do so will loosen the cable and cause a contact failure when moving the AVC System.
This can cause result in an error message appearing on the screen without a visible picture.
•
•
9
Standard
DIN45325 plug
(IEC 169-2) 75
q
coaxial cable
Connecting the HDMI cable with the
fixture
HDMI cable (supplied)
Do not use excessive
force when inserting/
removing the HDMI
cable. The terminal or
cable may become
damaged.
The fixture
anchor hole
LC-65XS1M_en.indd 9
LC-65XS1M_en.indd 9
2009/01/15 16:02:53
2009/01/15 16:02:53
