Sharp Aquos LC-45GD1E, Service Manual, Page: 41 / 281

41
TU-45GD1E
LC-45GD1E
Software Upgrade Procedure
(for Europe model (separate type))
2
When the formatting is over, the following window appears. Click [OK].
The model employs the following software.
1. Main software (AVC system)
2. Monitor microcomputer software (Display)
3. Card microcomputer software
4. Digital Broadcasting Receiver microcomputer software.
The main software and the monitor microcomputer software can be upgraded by using a general-purpose SD
memory card, while the card microcomputer software by using a PC card. The followings are the procedures for
upgrading, explained separately for each of the main software, the monitor microcomputer software, the card
microcomputer software and Digital Broadcasting Receiver microcomputer software.
1. Main software version upgrade
Get ready before you start
•
SD memory card of 16MB or higher capacity
•
PC running on Windows 98/98SE/ME/2000/XP operating system
•
USB reader/writer and PC card adapter for reading and writing SD memory card
•
Software for formatting SD card
(Downloadable at http://panasonic.jp/support/audio/sd/download/sd_formatter_e.html)
Preparation
To upgrade the main software, it is necessary to get ready the SD card for version upgrade before you start.
Follow the steps below and create the SD card for version upgrade.
1
Insert the SD card into the SD card reader/writer. Start the SD card formatting software. Click [Format].
(When you have the drive options, select the drive where the SD card is inserted before you proceed.)
Caution: While rewriting a microcomputer software, never power off the unit. Otherwise the system
may be damaged beyond recovery.