Sharp Aquos LC-45GD1E, Service Manual, Page: 17 / 281

17
TU-45GD1E
LC-45GD1E
REMOVING OF MAJOR PARTS
(TU-45GD1E)
1. Remove the two lock screws from each of the right and left Side Shield, and detach the Side Shield by sliding
them backward.
2. Remove the five lock screws from the Top Cabinet, and detach the cabinet by sliding it backward.
3. Remove the five lock screws from the Bottom Cabinet, and detach the cabinet by sliding it backward.
4. Remove the tow lock screws from the Front Panel, and detach the panel.
5. Remove the lock screws and six hexagon shaft screws from the Rear Panel, and detach the Rear Panel.
6. Remove the DVI PWB.
6-1. Remove the four lock screws from the DVI PWB Angle.
6-2. Remove the four lock screws from the DVI PWB.
1
1
2
2
2
Top Cabinet
Side Shield (Right)
Side Shield (Left)
3
3
3
4
Bottom Cabinet
Front Panel
5
5
5
6-2
6-1
Rear Panel
DVI PWB
DVI PWB Angle
SD Cover
Card Cover