Sharp Aquos LC-45GD1E, Service Manual

Page: 28 / 281

28
TU-45GD1E
LC-45GD1E
Adjusting point Adjusting conditions Adjusting procedure
1 Factory setting
•
Bring the cursor on to "INDUSTRY INIT".
•
Set to [ON] using [ (+)] or [ (–)] key, and
press [OK] to execute the initialization.
After the start of execution, the input switches to
DTV. Visually check that the "Virgin Mode" appears
on the DTV Display.
When the initialization is complete, the process
adjustment mode screen is replaced by the TUNER
screen.
* When HDCP is OFF, the process mode is not
exited even if the factory setting is complete.
Confirm the HDCP setting.
•
Turn off AC power to the AVC system.
(Never shut off the power during the
initialization process.)
3) Factory Setting
The following settings are initialized in this
adjustment.
1) User setting
2) Channel data (e.g. broadcast frequencies)
3) Operation time
4) Auto installation flag
5) Maker optional setting
6) Password data
To exit the process adjustment mode, unplug the AC power cable from the outlet to make a forced shutdown.
2) Key writing
(1) HDCP key writing
Adjusting point Adjusting conditions Adjusting procedure
Bring the cursor on "KEY WRITE". Set to [ON] using
[ (+)] or [ (–)] key, and press [OK].
When "KEY WRITE OFF" is displayed, writing is
complete. Process adjustment mode
page 2 1 HDCP key writing
(enables the HDCP
operation)
Process adjustment mode
page 2
Caution: After the factory setting is performed, never turn on the power. If the power is turned on, per-
form the factory setting again. Do not set to "OFF" with a remote control or AVC power SW.