background image

 16

A. Information on Disposal for Users (private households)

1. In the European Union

Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin!

Used electrical and electronic equipment must be treated separately and in accordance 
with legislation that requires proper treatment, recovery and recycling of used electrical and 
electronic equipment.
Following the implementation by member states, private households within the EU states may 
return their used electrical and electronic equipment to designated collection facilities free 
of charge*. In some countries* your local retailer may also take back your old product free of 
charge if you purchase a similar new one.
*) Please contact your local authority for further details.

If your used electrical or electronic equipment has batteries or accumulators, please dispose of 
these separately beforehand according to local requirements.

By disposing of this product correctly you will help ensure that the waste undergoes the 
necessary treatment, recovery and recycling and thus prevent potential negative effects on 
the environment and human health which could otherwise arise due to inappropriate waste 
handling.

2. In other Countries outside the EU

If you wish to discard this product, please contact your local authorities and ask for the correct 
method of disposal.

For Switzerland: Used electrical or electronic equipment can be returned free of charge to the 
dealer, even if you don’t purchase a new product. Further collection facilities are listed on the 
homepage of www.swico.ch or www.sens.ch.

B. Information on Disposal for Business Users

1. In the European Union

If the product is used for business purposes and you want to discard it:

Please contact your SHARP dealer who will inform you about the take-back of the product. 
You might be charged for the costs arising from take-back and recycling. Small products (and 
small amounts) might be taken back by your local collection facilities.

For Spain: Please contact the established collection system or your local authority for take-
back of your used products.

2. In other Countries outside the EU

If you wish to discard of this product, please contact your local authorities and ask for the 
correct method of disposal.

Attention: Your 
product is marked 
with this symbol. 
It means that used 
electrical and 
electronic products 
should not be 
mixed with general 
household waste. 
There is a separate 
collection system for 
these products.

The battery supplied with this product contains traces of Lead.

For EU: The crossed-out wheeled bin implies that used batteries should not be put to the 
general household waste! There is a separate collection system for used batteries, to allow 
proper treatment and recycling in accordance with legislation. Please contact your local 
authority for details on the collection and recycling schemes.

For Switzerland: The used battery is to be returned to the selling point.

For other non-EU countries: Please contact your local authority for correct method of disposal 
of the used battery.

End of life disposal

Summary of Contents for Aquos LC-32A47E





















Reviews: