13
Useful features
Freezing the image while watching
Allows you to capture and freeze one frame from a
moving image that you are watching.
Press
Z
.
Captures one frame from a moving image.
Press
Z
again to cancel the function.
NOTE
The still image automatically goes out after 30 minutes.
Teletext function
What is Teletext?
Teletext broadcasts pages of information and
entertainment to specially equipped TV. Your TV receives
Teletext signals broadcast by a TV network, and decodes
them into graphical format for viewing. News, weather
and sports information, stock exchange prices and
programme previews are among the many services
available.
Turning Teletext on/off
Select a TV channel or external source
providing a Teletext programme.
Press
m
to display the Teletext.
Press
m
again to display the Teletext
on the right screen and normal image
on the left screen.
Each time you press
m
, the screen switches as shown
below.
1
•
2
•
1
2
3
•
If you select a programme with no Teletext signal, “No
Teletext available.” displays.
The same message displays during other modes if no
Teletext signal is available.
NOTE
Teletext will not work if the selected signal type is “RGB” (Page
11).
•
•
•
Time display
You can display the time information included in the
Teletext broadcasts.
Select a TV channel providing Teletext
information (The time information is
automatically captured).
Press
p
. The channel display will
appear on the TV.
Press
p
again within the several
seconds that the channel display is on
the screen.
Time information will display below the
channel display for several seconds.
Even when you change the TV
channel, you can display the time
information with steps 2 and 3.
NOTE
The time display cannot be stored once the power is turned off.
When you turn on the power, perform steps 1 to 4 again.
If acquired successfully, the time information will appear in the
upper-right corner of the screen by pressing
MENU
.
Button functions
Buttons
Description
P
r
/
s
Increase or decrease the page number.
Colour (Red/
Green/Yellow/
Blue)
Select a group or block of pages displayed in the
coloured brackets at the bottom of the screen by
pressing the corresponding
Colour (Red/Green/
Yellow/Blue)
on the remote control unit.
0–9
Directly select any page from 100 to 899 by using
0
–
9
.
v
(Top/
Bottom/Full)
Switch the teletext image to Top, Bottom or Full.
k
(Reveal
hidden Teletext)
Reveal or hide hidden information such as an answer
to a quiz.
3
(Hold)
Stop updating Teletext pages automatically or release
the hold mode.
[
(Subtitle for
Teletext)
Display the subtitle or exit the subtitle screen.
Subtitle will not be displayed when the service does
not contain the subtitle information.
•
1
(Subpage)
Reveal or hide subpages.
Red button: Move to the previous subpage.
Green button: Move to the following subpage.
These two buttons are shown on the screen by the
signs
k
and
l
.
•
•
•
1
2
3
4
•
•
NOTE
When no signal is input, the sound mode will display “MONO”.
•
Selecting a sound mode
Each time you press
2
, the mode switches as illustrated in the following tables.
NICAM TV broadcasts selection
Signal
Selectable items
Stereo
NICAM STEREO, MONO
Bilingual
NICAM CH A, NICAM CH B, NICAM CH AB,
MONO
Monaural
NICAM MONO, MONO
A2 TV broadcasts selection
Signal
Selectable items
Stereo
STEREO, MONO
Bilingual
CH A, CH B, CH AB
Monaural
MONO
TELETEXT
TELETEXT
