-19
9
Enter the configuration name in “Profile Name”.
Enter “802.11 AdHoc mode” here as an example.
10
Select “Peer-to-Peer” in “Network Type”.
•
When connecting to the Network using an Access Point, change the “Network Type” to “Ac-
cess Point”.
•
When changing a channel, use
'"
to select the channel.
•
When changing the SS ID, enter SS ID in the “SS ID” field.
•
When setting the encryption key, refer to
“
10.3 Encryption Tab
”
on
page 25
.
11
Click “Apply”.
12
Click
on the upper right of the screen to close the “Configuration Utility” dialog
box.
To communicate again with the access point:
When setting in the following way, you will be able to communicate again with the access point.
•
Check the Windows Network Settings.
(For more information about the settings, please
refer to the Windows user’s guide.)
•
In the “Configuration” tab (step
10
above), select “Access Point” in “Network Type”.
