-10
7
Select the install destination on the “Choose Destination Location” dialog box,
and then click “Next>”.
•
Normally, it is not necessary to change the settings providing there are no problems.
8
Click “Next>”.
Installation starts. When the “Digital Signature Not Found” dialog box or the “Hardware Instal-
lation” dialog box is displayed, click “Yes” or “Continue Anyway”.
When installation has finished, “InstallShield Wizard Complete” dialog box is displayed.
Depending on the operating system, the “InstallShield Wizard Complete” dialog box may not
be displayed. In this case, restart your computer.
9
Select “Yes, I want to restart my computer now.”, and then click “Finish” to re-
start the computer.
If your operating system is Windows 2000 or Windows XP, the “InstallShield Wizard Complete”
dialog box may not be displayed. In this case, restart your computer. After restarting your com-
puter, log on with the same log-on name you used in step 2.
The following procedures vary depending on the operating system you are using.
•
Windows 98/Me ....................
page 11
•
Windows 2000 ......................
page 12
•
Windows XP .........................
page 13
