Sharp AM 900 - Digital Office Laser Copier Online Manual Download Page 14

Page: 14 / 161

Installation

Releasing the scanner

Before plugging in the power cord, pull the scanner release toward you to
release the scanner lock.

Caution:

Plugging in the power cord without releasing the scanner lock

may damage the machine.

If you need to move the machine:

In the event that you need to move the machine to a new location,
disconnect the telephone line cord before unplugging the power cord.
After you have unplugged the power cord, push the scanner release back
in to lock the scanner.

After moving, release the scanner lock first and then plug in the power
cord. Connect the telephone line last.

Summary of Contents for AM 900 - Digital Office Laser Copier


































































































































































Search results

Summary of Contents for AM 900 - Digital Office Laser Copier

Reviews:

Related manuals for AM 900 - Digital Office Laser Copier

Brands by name

Popular brands

Sharp AM 900 - Digital Office Laser Copier, Online Manual

Search results

Summary of Contents for AM 900 - Digital Office Laser Copier

Reviews:

Related manuals for AM 900 - Digital Office Laser Copier

Brands by name

Popular brands