Sharp AM 900 - Digital Office Laser Copier Online Manual Download Page 116

Page: 116 / 161

Scanning From a WIA Application (Windows XP/Me only)

114

Place the original on the document glass.

Open the document glass cover and place
the original face down on the glass with
the top edge against the document guide.

Make sure the center of the original is
aligned with the center mark on the
document guide, and then close the
cover.

Important: Make sure the glass is
clean. Any dirt, fingerprints, hair, or
other debris may affect the quality of
the scanned image.

Start your WIA-compliant application on your computer.

Scanning From a WIA Application (Windows
XP/Me only)

If you are using Windows

XP or Windows

Me, you can scan a document

into Paint

or any other WIA-compliant application.

The auto document feeder cannot be used to scan a document into a WIA
application.

The maximum resolution is 600 dpi.

The machine does not need to be in scan mode to scan a document from a
WIA application.

Summary of Contents for AM 900 - Digital Office Laser Copier


































































































































































Search results

Summary of Contents for AM 900 - Digital Office Laser Copier

Reviews:

Related manuals for AM 900 - Digital Office Laser Copier

Brands by name

Popular brands

Sharp AM 900 - Digital Office Laser Copier, Online Manual

Search results

Summary of Contents for AM 900 - Digital Office Laser Copier

Reviews:

Related manuals for AM 900 - Digital Office Laser Copier

Brands by name

Popular brands