Sharp AM 900 - Digital Office Laser Copier Online Manual Download Page 123

Page: 123 / 161

Scanning From the Operation Panel

121

7. Scanning

Windows

2000

Click the

Start

button, point to

Settings

, and select

Control Panel

In the

Control Panel

, double-click

Scanners and Cameras.

Select

SHARP AM-900

and click the

Properties

button.

Click the

Events

tab in the

SHARP AM-900

Properties.

Select

SC1

from the

Scanner events

list.

Send to this application

, select the program that you wish to link to scan

menu SC1 (make sure only one program is selected).

Click the

Apply

button.

Repeat Steps 5 through 7 as needed for any of the other scan menus (SC2 to
SC6) that you wish to use. When finished, click the

button to close the

window.

To make the new scanner event settings take effect, you must restart your
computer.

Summary of Contents for AM 900 - Digital Office Laser Copier


































































































































































Search results

Summary of Contents for AM 900 - Digital Office Laser Copier

Reviews:

Sharp AM 900 - Digital Office Laser Copier, Online Manual, Page: 123 / 161

Search results

Summary of Contents for AM 900 - Digital Office Laser Copier

Reviews: