Sharp 4470 - FO B/W Laser Facsimile Operation Manual Download Page 29

Page: 29 / 148

Setting the Date and Time

1. Installation

Press

to select A.M. or

to select P.M.

Press

to start the clock.

Press

twice to return to the date and time display.

START/
ENTER

STOP

Press

and

Press

and .

Press

to turn on the Daylight Saving Time function, or

to turn it

off.

Press

twice to return to the date and time display.

MENU

STOP

Daylight Saving Time

If desired, you can set the clock to move forward and backward automatically
at the beginning and end of Daylight Saving Time.

Display:

3:ENTRY MODE

ENTER

#(01-08, , )

05:DAY LIGHT SAVING
1=YES, 2=NO

Summary of Contents for 4470 - FO B/W Laser





















































































































































Search results

Summary of Contents for 4470 - FO B/W Laser

Reviews:

Related manuals for 4470 - FO B/W Laser

Brands by name

Popular brands

Sharp 4470 - FO B/W Laser, Facsimile Operation Manual

Search results

Summary of Contents for 4470 - FO B/W Laser

Reviews:

Related manuals for 4470 - FO B/W Laser

Brands by name

Popular brands