Sharp 4470 - FO B/W Laser Facsimile Operation Manual Download Page 92

Page: 92 / 148

Entering and Using Programs

Serial Polling

(Continued from

Initial procedure

Polling

(Continued from

Initial procedure

Dial the machine to be polled using one of the following methods:

•

Press a Rapid Key.

•

Press

and enter a Speed Dial number (if you enter less than 2

digits, press

to complete the entry).

•

Enter a full fax number with the numeric keys.

Press

repeatedly until you return to the date and time display.

SPEED DIAL

START/
ENTER

STOP

Dial the machines to be polled using one or more of the following

methods:

•

Press one or more Rapid Keys.

•

Enter one or more Speed Dial numbers, pressing

before each

number. (If you enter less than 2 digits for a Speed Dial number, press

to complete the entry.)

•

Enter one or more full fax numbers with the numeric keys, pressing

after each full number.

•

Press one or more Group Keys.

SPEED DIAL

START/
ENTER

Summary of Contents for 4470 - FO B/W Laser





















































































































































Search results

Summary of Contents for 4470 - FO B/W Laser

Reviews:

Related manuals for 4470 - FO B/W Laser

Brands by name

Popular brands

Sharp 4470 - FO B/W Laser, Facsimile Operation Manual

Search results

Summary of Contents for 4470 - FO B/W Laser

Reviews:

Related manuals for 4470 - FO B/W Laser

Brands by name

Popular brands