SHARKS SH 18V Li-Ion, Instruction For Operation And Maintenance

Page: 43 / 58

420 774 335 397 www.sharks-shop.cz Stránka 43
●
Never immerse tool or the charger in water or other liquids.
●
Protect batteries and charger from moisture. Do not use the charger outdoors in bad
weather.
●
Do not drop the battery and charger. Do not apply pressure or any other form of
mechanical stress.
● Use a cordless drill at an ambient temperature between 0-40°C. Always charge and storing
the battery pack between temperatures 0ºC to 30ºC.
1. Use clamps or other practical ways to support and secure the workpiece to a stable base.
Holding the workpiece by hand or against the body is unstable and may lead to loss of
control.
2. Do not heat the tool. Use the appropriate tool for your work. The right tool will work better
and safer at the speed for which it is designed.
3. Do not use a tool for which the trigger switch does not work. Any tool that can not be
operated by a switch is dangerous and needs to be repaired.
4. Disconnect the plug from the power supply before performing the adjustment, replacing
accessories, or storing the tool. Such preventive action reduces the risk of accidental launch
of the tool.
5. Keep the tools out of the reach of children and other untrained persons. Tools are
dangerous in the hands of unskilled users.
6. Carefully maintain tools. Keep cutting tools sharp and clean. Well-maintained tools with
sharp cutting edges are less prone to jam and easier to control.
7. Check the deflection or seizing of moving parts, component damage, and other conditions
that may affect the operation of the tool. If the tool is damaged, have it repaired before use.
Many accidents are due to poor tool maintenance.
8. Only use the accessories recommended by your manufacturer for your model.
Accessories that can be used for one model may be dangerous when used on another
model.
9. The outside diameter and thickness of your accessories must be within the nominal range
for your electromechanical tools. Incorrectly sized accessories can not be sufficiently
protected or controlled.
10. The clamping dimensions of the discs, flanges, support plates or all other accessories
must be suitable for fastening to the tool spindle. Accessories with clamping holes that do not
fit the mounting dimensions of the electromechanical tool will be unbalanced, may vibrate
excessively and cause loss of control.
11. Keep the bumper at a safe distance from the work area. Anyone entering the work area
must use personal protective equipment. Workpiece fragments or damaged accessories may
flee and cause injury even outside the immediate work area.
12. Never turn off the power tool until the accessories stop completely.
Rotating accessories may catch the surface and loss of control of the instrument.
13. Clean the ventilation holes regularly. The engine fan draws dust into the cabinet and
excessive metal dust accumulation can cause electrical hazards.
14. Do not use accessories that require liquid cooling. Use of water or other cooling liquids
may cause injury or electric shock.
15. Pay particular attention to performing a "cut into the cavity" into existing walls or other
blind areas. The penetrating disk may cut gas or water pipes, electrical lines, or objects that
may cause back lit.
Kickback and related warnings
Backgammon is a sudden reaction to pinching or jamming a rotating disk, backing plate,
brush or other tool. Clamping or jamming causes a sharp stop of the rotating tool, which
consequently causes the uncontrolled tool to move in the direction opposite to the tool's
rotation at the jam.