High-Flying
HF-LPT120 Low Power WiFi Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com)
- 21 -
Module’s STA interface can connect with router and connect to TCP server in the network.
2.2.
Work Mode : Transparent Transmission Mode
HF-LPT120 module support serial interface transparent transmission mode. The benefit of this mode
is achieves a plug and play serial data port, and reduces user complexity furthest. In this mode, user
should only configure the necessary parameters. After power on, module can automatically connect to
the default wireless network and server.
As in this mode, the module's serial port always work in the transparent transmission mode, so users
only need to think of it as a virtual serial cable, and send and receive data as using a simple serial. In
other words, the serial cable of users’ original serial devices is directly replaced with the module; user
devices can be easy for wireless data transmission without any changes.
The transparent transmission mode can fully compatible with user’s original software platform and
reduce the software development effort for integrate wireless data transmission.
The parameters which need to configure include:
Wireless Network Parameters
Wireless Network Name
（
SSID
）
Security Mode
Encryption Key
TCP/UDP Linking Parameters
Protocol Type
Link Type
（
Server or Client
）
Target Port ID Number
Target Port IP Address
Serial Port Parameters
Baud Rate
Data Bit
Parity (Check) Bit
Stop Bit
Hardware Flow Control
2.3.
UART Frame Scheme(Reserved)
2.3.1.
UART Free-Frame
HF-LPT120 support UART free-frame function. If user select open this function, module will check the
intervals between any two bytes when receiving UART data. If this interval time exceeds defined value
(50ms default), HF-LPT120 will think it as the end of one frame and transfer this free-frame to WiFi
port, or HF-LPT120 will receive UART data until 1000 bytes, then transfer 1000 bytes frame to WiFi
port.
