High-Flying
HF-LPT120 Low Power WiFi Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com)
- 25 -
3.
OPERATION GUIDELINE
3.1.
Default Parameter
When first use HF-LPT120 modules, user may need some configuration. User can connect to HF-
LPT120 module’s wireless interface with following default setting information.
Table 8 HF-LPT120 Default Setting
Parameters
Default Setting
SSID
HF-LPT120
IP Address
10.10.100.254
Subnet Mask
255.255.255.0
User Name
admin
Password
admin
3.2.
HF-LPT120 Usage Introduction
3.2.1.
Software Debug Tools
High-Flying use two common software tools debugging and applying HF-LPT120 module.
(User can also select other tools used to debug serial port).
Serial Debugging Software: ComTools
Ethernet Debugging Software: TCPUDPDbg
3.2.2.
Network Connection
User can select two methods to connect HF-LPT120 module base on dedicated application.
Use HF-LPT120 STA interface.
HF-LPT120 and debug PC2 connect to a wireless AP,
another PC1 (or user device) connect to HF-LPT120 module with serial port:
Figure 18.
STA Interface Debug Connection
Use HF-LPT120 AP interface.
Debug PC2 connect to HF-LPT120 through wireless
connection, another PC1 (or user device) connect to HF-LPT120 module with serial port.
