manualshive.com logo in svg

Shanghai High-Flying Electronics Technology Co. HF-LPT120, User Manual

Share
Download
Shanghai High-Flying Electronics Technology Co. HF-LPT120 User Manual Download Page 9

High-Flying

HF-LPT120 Low Power WiFi Module User Manual 

Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com)

 

- 9 - 

1.

 

PRODUCT OVERVIEW 

1.1.

 

General Description 

The HF-LPT120 is a fully self-contained small form-factor, single stream, 802.11b/g/n Wi-Fi module, 
which provide a wireless interface to any equipment with a Serial/PWM interface for data transfer.HF-
LPT120 integrate MAC, baseband processor, RF transceiver with power amplifier in hardware and all 
Wi-Fi protocol and configuration functionality and networking stack, in embedded firmware to make a 
fully self-contained 802.11b/g/n Wi-Fi solution for a variety of applications.  

The HF-LPT120 employs the world's lowest power consumption embedded architecture. It has been 
optimized for all kinds of client applications in the home automation, smart grid, handheld device, 
personal medical application and industrial control that have lower data rates, and transmit or receive 
data on an infrequent basis.  

The HF-LPT120 integrates all Wi-Fi functionality into a low-profile, 22mm x 13.5mm x 6mm module 
package that can be easily mounted on main PCB with application specific circuits. Also, module 
provides built-in antenna, external antenna option. 

1.1.1

 

Device Features 

 

Single stream Wi-Fi @ 2.4 GHz with support for WEP security mode as well as WPA/WPA2  

 

Based on Self-developed High Cost Performance SOC 

 

Includes all the protocol and configuration functions for Wi-Fi connectivity.  

 

Support STA/AP Mode 

 

Support Smart Link Function 

 

Support Wireless and Remote Firmware Upgrade Function 

 

Support External I-PEX or Internal PCB antenna connector options.  

 

Compact surface mount module 22mm x 13.5mm x 6mm  

 

Single supply – 3.3V operation.  

 

FCC/CE Certified.  

 

RoHS Compliant.  
 
 

Summary of Contents for HF-LPT120


































































Reviews:

No comments

Brands by name

Popular brands

Load more brands