High-Flying
HF-LPT120 Low Power WiFi Module User Manual
Shanghai High-Flying Electronics Technology Co., Ltd(www.hi-flying.com)
- 53 -
AT+SMTLKVER <CR>
+ok=<status><CR><LF><CR><LF>
Set Operation
AT+SMTLKVER=<ver><CR>
+ok<CR><LF><CR><LF>
Parameters
:
status: SmartLink config version
。
SMTLK 3.0: SmartLink V3 version, sniffer mode.
SMTLK 4.0:
SmartLink V4 version, sonic mode
ver
：
3
- Use
SmartLink V3 version, sniffer mode,
4
- SmartLink V4 version, sonic
mode. The corresponding APP can be downloaded from our website. See
appendix D for details.
4.2.2.67.
AT+WPS
Function: Start WPS function
Format:
Query Operation
AT+WPS<CR>
+ok=<status> <CR><LF><CR><LF>
Parameters:
status: WPS status. The module will reboot and work in STA mode connecting to
specific router when WPS communication is OK.
WPS Scan Failed: WPS communication is failed.
Note: The router WPS function must be open first then enable module WPS Scan function.
The module will quit WPS scan status if there is no WPS router in 5 seconds. If the router's
WPS is enabled, the module will reboot and enter WPS mode without reply +ok.
4.2.2.68.
AT+WPSBTNEN
Function: Enable/Disable WPS function.
Format:
Query Operation
AT+WPSBTNEN<CR>
+ok=<status> <CR><LF><CR><LF>
Set Operation
AT+ WPSBTNEN =<status><CR>
+ok<CR><LF><CR><LF>
Parameters:
status:
on: Enable WPS function
off: Disable WPS function.
Note: The router WPS function must be open first then enable module WPS Scan function.
The module will quit WPS scan status if there is no WPS router in 5 seconds.
