9
Product Version 1.0 | Revision A | Released 2023-01-10
TEMPORARY INSTALLATIONS
The Touring Bracket is designed for temporary
installations and rental applications. It is a
versatile bracket, meant for attachment to truss
or pipes. A VPL Single Touring bracket can carry a
SGM VPL 1220-20 if it is placed no more than 300
mm away from either end of a VPL. (see figure 5).
Figure 5: Bracket guide-line, if the bracket is closer to than
300mm to the edge, two brackets are advised.
SAFETY WIRES
The safety wire should be installed at the highest
point on the VPL to minimize the fall distance.
When installing VPLs in ceilings or any horizontal
plane with people below, make sure to install one
safety wire in both ends of the VPL (see figure 7). If
the fixtures are installed as an extension of each
other, one safety wire can be attached to two
adjacent fixtures (see figure 6).
Attach to suitable truss
Figure 7: Attach the safety wire in both sides.
Figure 6: Attaching safety wire through the holes in the VPL
profiles.
WARNING! ALWAYS INSTALL A SAFETY WIRE ON BOTH ENDS WHEN
USING VPLS IN A CEILING INSTALLATION. THE VPLS SHOULD ALWAYS BE
PROPERLY FIXED AND NOT HUNG IN THE CABLES.
one bracket
two brackets
300mm
300mm
