SGM VPL Series User Manual Download Page 1 | Manualshive

Page: 1 / 27

background image

USER

MANUAL

LED

VIDEO PIXEL LINEAR

Product Version 1.0 | Document Revision D | Released 2023-01-10

This manual covers installation, use, and maintenance of the SGM LED Video Pixel Linear. A digital version is
available at www.sgmlight.com or upon request via [email protected]. The information in this docu-
ment is subject to change without notice. SGM and all affiliated companies disclaim liability for any injury,
damage, direct or indirect loss, consequential or economic loss, or any other loss occasioned by the use of,
inability to use, or reliance on the information contained in this manual. The SGM logo, the SGM name, and
all other trademarks in this document pertaining to SGM services or SGM products are trademarks owned

or licensed by SGM, its affiliates, and subsidiaries. This edition applies to firmware version 2.23 or later.

English edition © 2022 SGM Light A/S®.

1
2
3
...
»

Summary of Contents for VPL Series




























Reviews:

No comments

Related manuals for VPL Series

Brand: Parker Pages: 5

Brand: Bacharach Pages: 31

Brand: Bacharach Pages: 2

Brand: Nektar Pages: 3

Brand: Youkey Pages: 86

Brand: Wacker Neuson Pages: 62

Brand: iHealth Pages: 8

Brand: Major tech Pages: 12

Brand: Abbott Pages: 64

Brand: Gako Pages: 22

Brand: ABB Pages: 38

Dome OnTop Weight

Brand: ABS Pages: 8

Brand: X-METAL Pages: 135

Brand: Conductix-Wampfler Pages: 12

Flumen OPTI-TR 22

Brand: Wilo Pages: 88

Brand: cormidi Pages: 54

CPX-AB-1-7/8-DN

Brand: Festo Pages: 2

Brand: CAMP Pages: 164

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands