18
Product Version 1.0 | Revision A | Released 2023-01-10
REPLACING
1
2
1
2
Step 1
Insert the power/data cable and ensure that it is
connected properly with a click sound on insertion.
Confirm the alignment of the arrows .
Step 2
Click the VPL into the brackets with the oblong hole first
and the single one after. Tighten the bolts after installa-
tion.
The VPL is intended to be set up for use prior to programming using the SGM Network Admin software available for
PC. Using the Admin software, the VPL system is designed for easy installation and patching. For detailed instruc-
tions and guidance on setup and configuration, please refer to the SGM Network Admin. The software and manual
for the SGM Network Admin is available at
It is recommended that any network design and installation be facilitated by personnel trained and experienced
with the programming and use of pixel control products. SGM recommends to always use dedicated professional
networks, instead of standard corporate networks.
VPL NETWORKING GUIDE
