18
5 Operation
5.4
Listening to the audible signal (beep)
5.4.1
In hold mode
The magnetometer is switched on. The value under
MODE
in
the menu is set to
0
.
●
Place your thumbs on the sensor area to switch on the beep.
●
Remove your thumbs from sensor area to switch off the beep.
Note:
Lift your thumbs well clear of the sensor area (at least 1 cm) to
switch off the beep. It is best to position your thumb beside the
sensor area.
5.4.2
In toggle mode
The magnetometer is switched on. The value under
MODE
in
the menu is set to
1
.
● Briefly touch the sensor area with your thumb to switch on the
beep.
● Briefly touch the sensor area with your thumb again to switch
off the beep.
Note:
Lift your thumb well clear of the sensor area (at least 1 cm) af-
ter touching it. It is best to position your thumb to the side of the
sensor area.
