100
Manual – DFE32B Fieldbus Interface PROFINET IO
9
Connection mode
MOVITOOLS® MotionStudio – Operation
9.6.2
Setting the connection mode (online or offline)
Proceed as follows to set the connection mode:
1. Select the connection mode:
• "Switch to online mode" [1] for functions (online tools) that should directly influ-
ence the unit.
• "Switch to offline mode" [2] for functions (offline tools) that should influence your
project.
2. Select the unit node.
3. Right-click to open the context menu and display the tools for configuring the unit.
INFORMATION
• The "online" communication mode is
NOT
a response message which informs you
that you are currently connected to the unit or that your unit is ready for communi-
cation. Should you require this feedback, observe section "Setting the cyclical ac-
cessibility test" in the online help (or the manual) of MOVITOOLS
®
MotionStudio.
• Project management commands (such as "download" and "upload"), the online
unit status, and the "unit scan" work independent of the set communication mode.
• MOVITOOLS
®
MotionStudio starts up in the communication mode that you set be-
fore you closed down.
64337AXX
[1]
"Switch to online mode" icon
[2]
"Switch to offline mode" icon
Summary of Contents for DFE32B PROFINET IO
Page 2: ...SEW EURODRIVE Driving the world...
Page 131: ......
