Chapter 5:
Timing
80
v3.3-a 12/07/2022
19.xx13.56
Sync-E
<Bool>
Disable/Enable Sync-E operation mode
19.xx13.20
Announce
Rate
<Enums>
Default: 1 packet/s
Rate of announce messages transmitted to be used
by
BMCA/FOCA.
From
1
packet
each
[2,4,8,16,32,128] seconds to [1,2,4,8,16] packets per
second.
19.xx13.21
Sync Rate
<Enums>
Default: 1 packet/s
Rate of sync (and follow-up) messages from master
to slave (Figure ). From 1 packet each
[2,4,8,16,32,128] seconds to [1,2,4,8,16,32,61,128]
packets per second.
19.xx13.22
Delay Req
Rate
<Enums>
Default: 1 packet/s
Rate of delay request from slave to master. From 1
packet
each
[2,4,8,16,32,128]
seconds
to
[1,2,4,8,16,32,61,128] packets per second.
19.xx13.23
Peer
Delayreq
Rate
<Enums>
Default: 1 packet/s
Rate of Peer delay request when operating in P2P
mode. From 1 packet each [2,4,8,16,32,128] seconds
to [1,2,4,8,16,32,61,128] packets per second.
19.xx13.18
User offset
<Integer>
Default: 0 ns
User offset to compensate internal PTP delay.
19.xx13.24
PTP
Timescale
<Enum>
1.
PTP
2.
ARB
By default, the
“PTP”
timescale distribute the best
estimate of standard TAI timescale include the UTC
offset. If the user application does not need to be
“traceable” to UTC/TAI, the user can define its own
timescale and inform the network that timescale is
arbitrary (ARB),
9.xx12.x
net/<iface>/server/cfg/
Configuration of the ESMCd daemon
9.xx12.1
Force SSM
Code
<Enum>
-
Auto
-
QL PRC
-
QL SSU A
-
QL SSU B
-
QL SEC
-
QL DNU
SSM code provide by the ESMCd daemons.
When Auto the SSM code will be automatically
selected depending on the state of the device
(i.e., QL PRC when locked to external ref, QL DNU
when free-running)
