Chapter 3:
Device
connectivity
39
v3.3-a 12/07/2022
Figure 3:2 - Putty configuration for serial port connection.
3.3.4.2 Logging from SSH
It is also possible to connect to the device via SSH with Putty
The process to connect to the UART using Windows (XP, Vista, 7, 8, 10) is explained below:
1.
2.
Verify that the
Connection type
corresponds to SSH.
3.
Finally, write root@<IP> under the
Host Name (or IP address)
field, and click on Open.
3.3.4.2.1 Compatibility with wrz_config
In order to make Putty compatible with the wrz_config color scheme and avoid strange
characters, it is recommended to try the following configuration:
1.
Change remote character set to ISO-8859-1.
2.
Uncheck “Override with UTF
-
8 if locale says so”.
3.
Select “Use Unicode line drawing code points”
(this is the default).
