Chapter 7:
Monitoring
& Logging
120
v3.3-a 12/07/2022
•
v3: Parameters for SNMP v3 users and passwords. There are
OID
Name
Value type
Description
13.3X10.1 User name
<String>
(i.e.,
userSNMP)
Name of the SNMPv3 user.
13.3X10.2
Access view
<Enum>
- none
- basic
- extended
- all
Access view options:
- none: Disable SNMP v1 and v2.
- basic: Show basic SNMP information.
- extended: Show extended SNMP information.
- all: Show all the SNMP information
13.3X10.3
Access mode
<Enum>
- ro: Read only.
-
rw:
Read/write
Access mode options.
13.3X10.4
Auth
<Enum>
- MD5.
- SHA.
Authentication encryption protocol.
13.3X10.5
Priv
<Enum>
- DES.
- AES.
Privacy encryption protocol.
7.2.1.1 General configuration
In order to configure SNMP from the CLI, the wrz_config tool must be accessed. Once it has been
launched, the SNMP configuration is under Management > SNMP.
Figure 7:2 - SNMP configuration.
Under the different tabs, all the described information in the previous tables or in the following
sections can be accessed, modified, and saved.
On a different thread, the general commands to manage SNMP from a command line, e.g.
snmpget,
snmpset,
snmpwalk or snmpusm, are available in the device. A detailed explanation
about how to use them is out of the scope of this user guide, but multiple SNMP tutorial guides
can be found online. Additionally, the gpa_ctrl tool allows to visualize all the parameters in a
quick view.
gpa_ctrl
–
A misc snmp
