background image

ServerLink Dual Rail LCD Console

 

 

17

 

 

LCD Panel Specification

 

 
                                                 

Specifications 

17.3”W LCD Panel 

Active Display Area 

381.89 x 214.81 (mm) 

Pixel Pitch (mm) 

0.199(H) x 0.199(V) 

Resolution 

1920 x 1080 @60/70/75Hz 

Color Pixel Arrangement 

RGB vertical strip 

Display Mode 

Normal White 

Brightness(cd/m^2) 400 

(center) 

Contrast Ratio 

500:1 

Display Color 

262K (RGB 6-bits) 

User Control 

OSD Control (auto saving) 

Input Signal 

RGB analog, H/V separate 

Plug-n-Play VESA 

VESA DDC 2B 

Power Consumption(Max) 

13.2W 

(normal operation)(Typical) 

Viewing Angle(Typical) 

- 70~ 70(H) 

- 60~ 60(V) 

Backlight Unit 

LED 

Operating  

Temperature 

0 to + 50 (

°

C) 

- 20 to + 60 (

°

C) 

Storage (Shipping) 

Temperature 

Operating Humidity 

Relative Humidity 8% ~ 95% 

Non-Operating Humidity 

95% RH 

Power Supply Input Voltage 

Full range, 100V AC to 240V AC 

Approval 

CE, FCC, C-Tick for the product.    UL, TUV, CE, C-Tick for power supply 

 

 

 

Notice

 

 

In no event shall the unit be responsible or liable for any damage due to accident, 

unauthorized alterations, improper repair, modifications, inadequate maintenance and care, 

or use in any manner for which the product was not originally intended.

 

Summary of Contents for LKS-1601CM




















Reviews: