ServerLink Dual Rail LCD Console
14
Replaceable Keyboard and Touch Pad
Replace Keyboard
Take the keyboard out : The keyboard is replaceable for language change or maintenance. Pull the
keyboard part outwards to the end and unfold the LCD monitor part. Unscrew 6 screws underneath the
drawer. There is a round hole underneath the drawer, finger pushes the keyboard upwards through this hole.
Lift it up; locate the mini-USB cable underneath the keyboard. Gently unplug it and take it out.
Put the keyboard in : While installing a keyboard, make sure that you extend proper length of the cable to
flat it inside the tray. Hold the keyboard with two hands evenly and place it over the foam. Do not use one
hand to squeeze keyboard inside the tray. Double check the USB cable is placed inside the ditch flat without
any twist. Plug the keyboard connector firmly.
WARNING
Make sure that the USB wire is placed inside the line holder and fixed
After placing the keyboard inside the tray, make sure that the keyboard lies down evenly
and flatly to avoid any scratch or damage.
