ServerLink Dual Rail LCD Console
7
Step 6.
Remove the 1~4 screws of
Safety Stoppers
located on front sides (left & right) side in sequence.
Step 7.
Slide the drawer out and then remove the 4 screws of Safety Stoppers located on two edge sides
(left & right) in sequence.
Note
: Keep the removed parts in a proper place after install in case you need to move or pack again.
WARNING
The safety stoppers are purposely designed to prevent the drawer from sliding out when in
transit. After the safety stoppers are removed, the drawer may slide out when be tilted and
can cause serious injury.
Step 8.
Connect the power supply to the power jack on the
KVM Switch Module
, Then the assembly is
completed.
Division of the module into the independent part of switch, monitor, keyboard, and touch pad, is a uniquely
flexible, modularized design with human-factored caring. It provides users a significant benefit on expense
saving and time saving. Whenever a maintenance or repair issue encountered, users can easily replace only
the part of the switch module by following above
Step 4
to
Step 5
.
