background image

 ServerLink Dual Rail LCD Console 

1

 

------------------------ 

Introduction

 

 

The ServerLink LCD offers the ultimate in styling and computer management. With a keyboard, mouse, TFT 
LCD panel and a ServerLink LCD KVM switch module housed in an industry standard 19" 1U-height rack 
drawer, it saves you up to 1/3 of valuable real estate from a rack cabinet.    Better yet, when the ServerLink 
LCD Console is cascaded with other ServerLink LCD KVM switch modules to increase server management 
capacity, you save even more!   
 
The Dual Rail design allows the keyboard and LCD display to slide in and out the rack independently of 
each other which allows the keyboard to be conveniently stowed away while the monitor is still displayed. 
 
All KVM switch modules come with a universal C-36 connector for connection between the console drawer 
and a ServerLink LCD KVM switch module.    This modularized design offers the maximum flexibility, as you 
can choose and swap the modules to fit your needs. A ServerLink LCD KVM switch module can also be 
used as an independent KVM switch.   

 

 

The ServerLink LCD Console comes in three parts                
 

A

    1RU Dual Rail Drawer with Keyboard, Touch Pad and LCD Monitor 

 

B1

  KVM Switch Module 

 

B2

   

Extension Kit 

 

   

Rear Bracket 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for LKS-1601CM




















Reviews: