background image

www.servware.com

800•768•5953

LIMITED ORIGINAL COMMERCIAL EQUIPMENT WARRANTY

27

of incorrect current rating or voltage. All damage due to over voltage is excluded from the 

warranty. Non-clog range top open burners have a lifetime warranty. Original purchased 

replacement parts supplied by Serv-Ware Products will be warranted for 30 days from the 

parts invoice date. This warranty is for parts cost only and does not include freight or labor 

charges.

Serv-Ware Products assumes no liability for misuse or inadequate maintenance of the 

Product. In no event shall the user by entitled to recover incidental or consequential 

damages. Including but not limited to; damages for inconvenience, food loss, rental or 

replacement equipment, loss of profits, or other commercial loss. Warranties stated 

above are the only warranties made in connection with the sale and distribution of Serv-

Ware Products products. ANY AND ALL OTHER EXPRESSED STATUTORY AND IMPLIED 

WARRANTIES APPLICABLE TO THE PRODUCT INCLUDING, WITHOUT LIMITATION, ALL 

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE EXPRESSLY 

DISCLAIMED. The warranty information set forth above shall be governed by and construed 

in accordance with the laws of the State of North Carolina and, if applicable, the laws of 

the United States of America. The warranty, as stated, is extended only to the original 

owner/user and is not assignable. Serv-Ware Products reserves right to change product 

specifications without notice due to constant product improvement.

Summary of Contents for Select Series































Reviews: