Doc No. 006-0211-00 Rev AD
Page 48 of 62
Figure 44. Standoff placement.
2. Check switch position on 4-20 mA card to verify it is configured properly as
shown in Figure 45.
Figure 45. Switch Position.
3. Wire 4-20 mA current loop with power supply. Figure 46.
Figure 46.
4. Install Relay card and secure with 4-40 screw provided. Figure 47.
Figure 47. Screw position.
4-20mA
Switch
position
Install standoff here
4-20 mA Receiver
Install
screw here
If a second 4-20 mA card is
installed, the upper card will
have this switch in the opposite
position. The lower card will
have the switch in the position
shown.
