4.1. HOW TO CONF
I
GURE THE POLARX5S AS AN RTK BASE STAT
I
ON
Figure 4-2:
Setting the static position of the reference station antenna
Click on
‘
Ok
’
to apply the new settings
Step 2: Configure output of correction data over Ethernet
Output of di
ff
erential corrections can be con
fi
gured in the
Corrections Output
window as
Figure 4-3 shows. Click on
New RTCM3 output
to start the sequence of con
fi
guration steps.
RTCMv3 is the most compact and robust di
ff
erential correction format and it is
recommended to use this format where possible.
Select the Ethernet port you wish to use avoiding the commands port (28784), the webserver
port (80), the FTP port (21) as well as the default NTR
I
P port (2101) and the NTP port (123).
The example shown in Figure 4-3 uses port 28785.
The messages necessary for RTK and DGNSS are selected by default. A summary of other
RTK messages can be found in the
‘
PolaRx5S Reference Guide
’
.
20
Summary of Contents for PolaRx5S
Page 1: ...PolaRx5S User Manual ...
Page 102: ...6 In the File Naming tab select manual file naming and provide a file name 102 ...
Page 107: ...107 ...
