SEPTENTRIO AsteRx SB Sx User Manual Download Page 7

Page: 7 / 85

CHAPTER 2. ASTERX SB SX OVERV

2 AsteRx SB Sx Overview

The AsteRx SB Sx is an

P68 compliant, multi-constellation, multi-frequency GNSS receiver

ideal for rapid integration into machine control or sensor fusion applications.

t o

ﬀ

ers an

extensive range of cable and wireless connections for maximum

ﬂ

exibility.

2.1 Key features

Quad-constellation, multi-frequency all-in-view RTK receiver

Robust and compact

P68 weatherproof housing

M+ interference monitoring and mitigation system

Bluetooth, WiFi, Ethernet, Serial and USB communications

2.1.1 GNSS speciﬁcations

448 hardware channels to track the following supported signals:

•

GPS: L1CA, L1PY, L2PY, L2C, L5

•

GLONASS: L1CA, L2P, L2CA, L3

•

Galileo

: E1 BC (CBOC), E5 (a, b, AltBoc)

•

BeiDou

: B1, B2

•

SBAS: EGNOS, WAAS, GAGAN, MSAS, SDCM (L1, incl. L5 tracking)

• I

RNSS

: L5

•

QZSS: L1CA, L2C, L5

• I

ntegrated dual-channel L-band tracking

Optional feature

Navigation performance

Horizontal

Vertical

Standalone

1.2 m

1.9 m

SBAS (WAAS, EGNOS, MSAS)

0.6 m

0.8 m

DGPS

0.4 m

0.7 m

RTK (Fixed)

0.6 cm + 0.5 ppm

1 cm + 1 ppm

Summary of Contents for AsteRx SB Sx






















































































Search results

Summary of Contents for AsteRx SB Sx

Reviews:

Related manuals for AsteRx SB Sx

Brands by name

Popular brands

SEPTENTRIO AsteRx SB Sx, User Manual

Search results

Summary of Contents for AsteRx SB Sx

Reviews:

Related manuals for AsteRx SB Sx

Brands by name

Popular brands