CHAPTER 6. OTHER RECE
I
VER OPERAT
I
ONS
6.2 How to configure SBF and NMEA output
The AsteRx SB Sx can output position and GNSS data in both standard NMEA format and
Septentrio
’
s proprietary compact binary format SBF. This following sections detail how to
con
fi
gure connections to other devices in order to send data.
SBF and NMEA can also be logged on the internal 16 GB disk of the AsteRx SB Sx .
Section 6.3.1 and 6.4 detail how to log data on the receiver and how to download data
logged on the receiver.
6.2.1 Output over a serial COM connection
The AsteRx SB Sx can be connected via a serial COM cable to an RS-232 compatible secondary
device.
Step 1: Configure the serial COM port
The COM port of the AsteRx SB Sx should be con
fi
gured with the same baud rate and
fl
ow control setting of the coupled device.
These settings can be con
fi
gured via the
Communication/Serial Port
tab as shown in Figure 6-2.
I
n this example, COM3 is set with a
speed of 19200 baud.
Figure 6-2:
Con
fi
gure the baud rate and
fl
ow control of the AsteRx SB Sx
31
Summary of Contents for AsteRx SB Sx
Page 1: ...AsteRx SB Sx User Manual ...
