30
Installation instructions for trained electricians only
9
Disposal
Please dispose of packaging materials in accordance
with prevailing disposal regulations.
CAUTION - Environmental damage:
• All utilized materials are environmentally com-
patible; they are identified and they are
recyclable.
• Do not discard the unit in the regular household
trash.
Precious raw materials can be recycled if the
unit is properly discarded.
• Please contact your local municipality for
current waste disposal codes.
Make sure the unit you are discarding cannot be
used, so that it may not turn into a source of ha-
zard for children at play, for instance.
8
Changing the clock battery
Figure
1
WARNING - Electric shock:
Disconnect all poles of the sauna control
from the mains and secure from unintentio-
nal switching on prior to opening the cover
of the housing.
1. Slightly push in safety lock
5
and remove the
cover of the housing
6
.
2. Figure
2
: Release six-pin flat strip wiring
3
and
remove from connector
2
.
3. Carefully remove cover
2
from base of housing
7
.
4. Replace battery (type CR2032)
9
for clock on
upper board.
5. Insert strips
3
of cover
2
into both holding fix-
tures
4
on the sides and carefully push down on
the base of housing
7
.
6. Check function of both switches
C
. (On and off
position)
7. Figure
2
: Push six-pin flat wire strip
3
on con-
nector
2
until you can hear the lock lever snap
in position (lock lever points downwards).
8. Fit the housing cover
6
on the base of the hou-
sing
7
, rotate it downwards and push down on
it until you can hear it lock in position.
Check for secure fit of housing cover.
