34
Operating instructions for the user - Figure
8
3
When first turning on
The ON / OFF switch
1
completely separates the
control unit from the mains. An internal battery keeps
the saved settings and the time.
1
Entering the time [00:00 - 24:00]
The current time has to be set after starting the sau-
na control for the first time.
1. Turn on ON / OFF switch
1
.
The display
5
indicates:
SAUNA
OFF
Time
— — : — —
(or an arbitrary setting)
2. Press OK
6
.
The display
5
indicates:
SAUNA
SET
Time, e.g.,
12:00
NOTE - “High-speed run”:
Pressing and holding the UP / DOWN buttons
7
trig-
gers a “high-speed run” after 5 seconds.
3. Use the UP / DOWN buttons
7
to enter the desi-
red value, e.g. [18:00].
4
Press OK
6
.
The display
5
indicates:
SAUNA
SEND
Time
18:00
After approx. 1 second you will see:
SAUNA
OFF
Time
18:00
The time has been set.
4
Operating modes
Sauna operation can be carried out manually (quick-
start) or automatically.
1
Manual operation (quick-start)
Sauna operation starts immediately with the previously
set values.
After the set parameter for heating duration has lapsed,
the sauna will automatically stop operation.
2
Automatic operation:
The sauna operation is started with programmed set-
tings (refer to chapter 6).
What can be programmed?
After setting the time according to chapter 3, you will be
able to program the following functions:
1. Automatic
to activate automatic operation,
2. The start of heating
from 0 to 24 hrs., e. g. [18:00] hrs.,
3. The duration of heating
from 1 minute to 6 hrs., e. g. [02:30],
4. The temperature
15 - 110 degrees Celsius, e. g. [95° C],
5. The fan speed,
from 0 - 100 %, e. g. [50%].