Sentera Controls MCS-1-LCD, Mounting And Operating Instructions

Page: 12 / 33

www.sentera.eu
MIW-MCS-1-LCD-EN-000 - 20 / 07 / 2016 12 - 33
back to the table of contents
OPERATING INSTRUCTIONS
CONTROLLER OVERVIEW
T1
Ai1
T2
Ai2
Di1
Di3
Di2
Di4
REFERENCE:
CO2
Rel.humidity
Temp
AIR quality
Diff. pressure
TYPE :
0–10 VDC
2–10 VDC
0–20 mA
4–20 mA
PWM
SETPOINT
FIXED or
TIMESCHEDULE
RANGE
FIXED or
TIMESCHEDULE
ACTIVE STATE :
HIGH
LOW
Ao1 to
MAX
Ao1 to
OFF
Ao2 to
MAX
Ao2 to
OFF
RELAY
Control
PROBE TYPE:
PT500
PT1000
LINEAR
HEATING COOLING
HUMIDIFY DRY
OBTAIN DRAIN
CONTROL
PID
HUMIDIFY COOL
OBTAIN DRAIN
Ao1
0–10 VDC, 2-10 VDC
0–20 mA, 4-20 mA
PWM
Relay 1
Relay 2
Ao2
0–10 VDC, 2-10 VDC
0–20 mA, 4-20 mA
PWM
Free
(Independent to Ao1)
Unbalanced to Ao1
Balanced to Ao1
DIGIT
AL OVER RULE
FUNCTION
DI - FUNCTION
CONTROL FUNCTIONS OVERVIEW
The MCS-1-LCD controller features integrated analogue and relay outputs which can
be controlled either in one of the pre-configured modes or they can be personalised.
Its numerous different analogue, digital and temperature inputs ensure a large range
of functional control. You can choose the control function between:
LINEAR FUNCTION
Analogue outputs in linear function of the inputs
In cool mode the value of the analogue output rises linear in function of a higher
measured input value (according to the sensor(s) selected). This linear function goes
from the minimum to the maximum range of the assigned input and drops to 0 VDC
when off level is reached. The off level can be selected over the full sensor range.
In heat mode the value of the analogue output drops linear in function of a higher
measured input value.
MCS-1-LCD
MULTIFUNCTIONAL LOGIC
CONTROLLER