SenTech CL Series Product Specifications Download Page 60

Page: 60 / 65

No.14S056-01

STC-CMC120APCL, STC-CMB120APCL
Specifications and Users guide

8.2.2 Mode

Trigger Polarity

Positive

Positive signal is availabe as Trigger

Negative

Negative signal is availabe as Trigger

Binning Mode

Normal

Disable the binning

Binning

Enable the binning. For further details, please refer to:

Binning[2AH.5-4],Sub[2AH.1-0].

The averaged pixel data will decrease the noise

level. For further details, please refer to section:

8.2.6.O

THER

Contiune/Trigger Shutter Mode

Continue Mode

This mode will obtain the image from the camera automatically. The trigger is
generated inside of the camera continuously.

Trigger Shutter Mode This mode will obtain the image from the external trigger timing. When this

mode is selected the Edge Preset & Pulse Width on the [Trigger Mode] are
available.

For further details, please refer to section:

Trigger Input Selection

CC1: Trigger signal input from the Camera Link connector on pin CC1.
SP4: Trigger singnal input from I/O port. For further details, please refer to section:

Exposure Start Mode

Normal:

The exposure will start after the trigger input. The exposure can start during the
video out from the camera with horizontal noise.

Horizontal Synchronization: The exposure can start during the video out from the camera without horizontal

noise. The maximum delay to start exposure from the trigger inputs in 1H.

Output Format Selection: The video output bit can be selected from either 8/10/12 bitand is different

depending on the mode. For further details, please refer to section:

4.2

ERTICAL

IMINGS

Summary of Contents for CL Series


































































Search results

Summary of Contents for CL Series

Reviews:

Related manuals for CL Series

Brands by name

Popular brands

SenTech CL Series, Product Specifications

Search results

Summary of Contents for CL Series

Reviews:

Related manuals for CL Series

Brands by name

Popular brands