SenTech CL Series, Product Specifications

Page: 21 / 65

No.14S056-01
21
STC-CMC120APCL, STC-CMB120APCL
Specifications and Users guide
4.2 Vertical Timings
For further details, please refer to section: 4.2 V
ERTICAL
T
IMINGS
.
Three different video scan modes are shown below:
Full scan: All of the lines and pixels are output from the camera
Binning: The averaged pixel value is output from the camera
Subsampling: Skipped the lines and pixels output from the camera
Overview of Full scan
All of the lines and pixels are output and the entire image is shown. When transmitting the image,
some configurations will not be supported, or can drop the frame rate.
4.3 Full Scan (STC-CMC120APCL / STC-CMB120APCL)
Table of Video Output on Full Scan mode (STC-CMC120APCL / STC-CMB120APCL)
Mode
(EEH) Tap
Number Configuration CameraLink Output PixelClock
Frequency(MHz) Horizontal
Pixel (Pixel) FPS[fps] Camera Link
Output Bit
0 2 Base 85.0
42.5 4096 12.9
6.4 8/10/12
16 3 Base 85.0
42.5 4092 19.4
9.8 8
1 4 MEDIUM 85.0
42.5 4096 25.9
12.9 8/10/12
2 8 FULL 85.0
42.5 4096 51.8
25.9 8
3 10 DECA 85.0
42.5 4090 62.3
31.1 8
Video out
FVAL
Vertical blanking
3110 H
One vertical (1V)
3072 H 38H(Min)
Video output
1 2
3071 3072
38 H(Min)