SU320CSX
4110-0446, Rev. C
Page 34 of 96
© 2017 UTC
Aerospace Systems
Date Printed: 3-Jan-2017
This document does not contain any export controlled technical data.
the User Configuration memory. This operation will return an error
if executed when only factory operational configuration slots exist.
If the Current Session Configuration slot is deleted from the User
Configuration memory, a subsequent query of the current session
operational configuration slot number will return the deleted
operational configuration slot number, since it is still the Current
Session Configuration, but a command to load the deleted
operational configuration slot number will return an error.
WARNING: If the startup operational configuration slot is deleted,
the camera startup operation is no longer specified. Use the
OPR:START followed by the CONFIG:SAVE commands to
reselect an existing operational configuration slot if the startup
operational configuration slot is deleted.
Setting Type
N/A
Command
OPR:DEL:ALL
Parameters
none
Return Values
none
Range
Type
Example
OPR:DEL:ALL
5.6.
Serial Communication Interface Commands
Baud rate configuration in the volatile memory space is managed with two discrete variables. The first
variable, current baud rate, represents the baud rate at which the camera is currently communicating. The
second variable, future baud rate, holds the baud rate value that will be stored to non-volatile memory
when a global configuration save (CONFIG:SAVE) is executed. Changing the current baud rate will
require the host to change baud rates for communication to continue. Changing the future baud rate and
saving it to non-volatile memory allows for the new baud rate to be effective upon reboot of the camera.
The factory default is 57600 baud. Other serial communication parameters are located in Table 6.
5.6.1.
Set Current Baud Rate
Description
This command updates the current baud rate variable. The baud rate
that the camera communicates at will change immediately.
WARNING: Changing the current baud rate will require the
host to change baud rates for communication to continue.
Setting Type
Global
Command
BAUD:CURRENT
baud_rate
Parameters
baud_rate
Return Values
none
Range
57600