ENGLISH
Pag. 51
³
Remote modification of the control panel settings, by the configuration software.
³
Remote management of the control panel, via third parties supervising software, by
using the Modbus protocol.
³
Remote management of the control panel, via a supervising software made by Sensi-
tron (future availability).
For technical features and use of TCP/IP module, please consult the product documentation.
3. System power up and operation
This chapter explains the procedures for the operation, the commissioning and the mainte-
nance of the control unit MU+/S1-32. For the programming of the MU+/
S1-32 control panel the PC software is required.
Figure 17) Control unit front panel
3.1
Power ON
After ensuring correct installation of the MU+/S1-32, the unit can be switched
on.When first switched on, after the “Warm Up” time (3 minutes by default), the display will
show an empty picture without any indication because, at the first switch ON, the control
panel needs programming.
Figure 18) Warm Up screen
ESC
ENT
Display
Numerical
keypad
Arrow
Keypad
Status
LED
Summary of Contents for MULTISCAN++/S1-32
Page 75: ......
